Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 58-49
Publication Number: 53-1000242-01
SEC-1195
58
Recommended
Action
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be
in the ready state. If a switch is in the error state, the database might not be correctly updated for that
specific switch.
Severity WAR NIN G
SEC-1195
Message
Probable
Cause
Indicates that there has been a corruption during the distribution of the security database. This can only
occur when the primary FCS is distributing the security database to the other switches in the fabric and
local validation finds that there is an error in the security database. This is a rare occurrence.
Recommended
Action
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be
in the ready state. If a switch is in the error state, the database might not be correctly updated for that
specific switch.
Severity WAR NIN G
SEC-1196
Message
Probable
Cause
Indicates that the default switch accounts admin and user do not exist on the switch when enabling
security.
Recommended
Action
Reset the default admin and user account names on the switch that reported the warning and retry
enabling security.
Severity WAR NIN G
SEC-1197
Message
Probable
Cause
Indicates that the specified account has changed.
<timestamp>, [SEC-1195], <sequence-number>,, WARNING, <system-
name>, This switch has no <component> license.
<timestamp>, [SEC-1196], <sequence-number>,, WARNING, <system-
name>, Switch does not have all default account names.
<timestamp>, [SEC-1197], <sequence-number>,, INFO, <system-name>,
Changed account <user name>.