Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

58-48 Fabric OS Message Reference
Publication Number: 53-1000242-01
SEC-1192
58
Recommended
Action
Check if the host IP address specified in the message can be used to manage the fabric through an HTTP
connection. If so, add the host IP address to the HTTP policy of the fabric. If the host is not allowed
access to the fabric, this is a valid violation message and an unauthorized entity is trying to access your
fabric. Take appropriate action, as defined by your enterprise security policy.
Severity INFO
SEC-1192
Message
Probable
Cause
Indicates that a serial or modem login security violation was reported. An incorrect password was used
while trying to log in through a serial or modem connection; the login failed.
Recommended
Action
Use the correct password.
Severity INFO
SEC-1193
Message
Probable
Cause
Indicates that a specified login security violation was reported. The incorrect password was used while
trying to log in through the specified connection method; the login failed.
Recommended
Action
The error message lists the violating IP address. Verify that this IP address is being used by a valid
switch admin. Use the correct password.
Severity INFO
SEC-1194
Message
Probable
Cause
Indicates that there has been a corruption during the distribution of the security database. This can only
occur when the primary FCS is distributing the security database to the other switches in the fabric and
local validation finds that there is an error in the security database. This is a rare occurrence.
<timestamp>, [SEC-1192], <sequence-number>,, INFO, <system-name>,
Security violation: Login failure attempt via <connection method>.
<timestamp>, [SEC-1193], <sequence-number>,, INFO, <system-name>,
Security violation: Login failure attempt via <connection method>.
IP Addr: <IP address>
<timestamp>, [SEC-1194], <sequence-number>,, WARNING, <system-
name>, This switch does not have all the required PKI objects
correctly installed.