Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

51-2 Fabric OS Message Reference
Publication Number: 53-1000242-01
PS-1003
51
Probable
Cause
Indicates that an unexpected software error has occurred in Advanced Performance Monitoring. The
Performance Monitor tracing system has failed to initialize.
Recommended
Action
Tracing will not be available for Advanced Performance Monitoring, but other functions should
function normally. To retry activating tracing, reboot (or fail over) the CP.
Severity INFO
PS-1003
Message
Probable
Cause
Indicates that the restoring configuration has attempted to set the end-to-end monitoring mask on at
least one ISL port.
Recommended
Action
No action is required. End-to-end monitoring is not supported on ISL ports when ISL monitoring is
enabled. ISL monitoring can only be disabled through the Fabric Access API.
Severity WAR NIN G
PS-1004
Message
Probable
Cause
Indicates that the restoring configuration has attempted to add end-to-end monitors on at least one ISL
port.
Recommended
Action
No action is required. End-to-end monitoring is not supported on ISL ports when ISL monitoring is
enabled. ISL monitoring can only be disabled through the Fabric Access API.
Severity WAR NIN G
PS-1005
Message
Probable
Cause
Indicates that ISL and end-to-end monitors have used up all hardware resources.
<timestamp>, [PS-1003], <sequence-number>,, WARNING, <system-name>,
Failed to set end-to-end monitoring mask on ISL ports.
<timestamp>, [PS-1004], <sequence-number>,, WARNING, <system-name>,
Failed to add end-to-end monitors on port <port> which is an ISL
port.
<timestamp>, [PS-1005], <sequence-number>,, WARNING, <system-name>,
ISL monitor on port <port> stopped counting because no hardware
resources are available