Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 25-77
Publication Number: 53-1000242-01
FW-1424
25
Probable
Cause
Indicates that the flash usage percentage has changed from a value outside of the acceptable range to a
value within the acceptable range. Flash increases and decreases slightly with normal operation of the
switch. Excessive permanent increases can lead to future problems.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity INFO
FW-1424
Message
Probable
Cause
Indicates that the switch status is not in a healthy state. This occurred because of a policy violation.
Recommended
Action
Run the switchStatusShow command to determine the policy violation.
Severity WAR NIN G
FW-1425
Message
Probable
Cause
Indicates that the switch status has changed to a healthy state. This occurred because a policy is no
longer violated.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity INFO
FW-1426
Message
<timestamp>, [FW-1424], <sequence-number>,, WARNING, <system-name>,
Switch status changed from <Previous state> to <Current state>.
<timestamp>, [FW-1425], <sequence-number>,, INFO, <system-name>,
Switch status changed from <Bad state> to HEALTHY.
<timestamp>, [FW-1426], <sequence-number>,, WARNING, <system-name>,
Switch status change contributing factor Power supply: <Number Bad>
bad, <Number Missing> absent.