Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

25-68 Fabric OS Message Reference
Publication Number: 53-1000242-01
FW-1359
25
FW-1359
Message
Probable
Cause
Indicates that the number of authentication failures has changed from a value outside of the acceptable
range to a value within the acceptable range. Authentication failures can occur for many reasons. The
switch on the other side might not support the protocol, have an invalid certificate, not be signed
properly or send unexpected packets. The port where authentication fails is segmented. This counter
keeps track of the number of authentication failures.
Recommended
Action
No action is required.
Severity INFO
FW-1360
Message
Probable
Cause
Indicates that the number of SLAP faulty packets has changed. This counter keeps track of the number
of unexpected SLAP packets and SLAP packets with faulty transmission IDs.
Recommended
Action
Responses to security-class messages depend on user policies. Consult your security administrator for
response strategies and policies.
Severity INFO
FW-1361
Message
Probable
Cause
Indicates that the number of SLAP faulty packets has fallen below the low boundary. This counter keeps
track of the number of unexpected SLAP packets and SLAP packets with faulty transmission IDs.
Recommended
Action
No action is required.
<timestamp>, [FW-1359], <sequence-number>,, INFO, <system-name>,
<Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1360], <sequence-number>,, INFO, <system-name>,
<Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
<timestamp>, [FW-1361], <sequence-number>,, INFO, <system-name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.