Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

25-10 Fabric OS Message Reference
Publication Number: 53-1000242-01
FW-1046
25
Severity INFO
FW-1046
Message
Probable
Cause
Indicates that the value of the SFP voltage has fallen below the low boundary.
Recommended
Action
Verify that your optical components are clean and function properly. Replace deteriorating cables or
SFPs. Check for damage from heat or age.
Severity WAR NIN G
FW-1047
Message
Probable
Cause
Indicates that the value of the SFP voltage has risen above the high boundary. The supplied current of
the SFP transceiver is outside of the normal range, indicating possible hardware failure.
Recommended
Action
If the current rises above the high boundary, you must replace the SFP.
Severity WAR NIN G
FW-1048
Message
Probable
Cause
Indicates that the value of the SFP voltage has changed from a value outside of the acceptable range to a
value within the acceptable range.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
<timestamp>, [FW-1046], <sequence-number>,, WARNING, <system-name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
<timestamp>, [FW-1047], <sequence-number>,, WARNING, <system-name>,
<Label>, is above high boundary(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1048], <sequence-number>,, INFO, <system-name>,
<Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.