Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

24-2 Fabric OS Message Reference

Publication Number: 53-1000242-01

FSSM-1004

Message

Probable

Cause

Indicates that the active CP and the standby CP in a dual CP system are running firmware that are

incompatible with each other. If the active CP fails, the failover will be disruptive. In a non-bladed

system, this message is logged when the firmware upgrade/downgrade was invoked. The new firmware

version is not compatible with current running version. This cause a disruptive firmware upgrade/

downgrade.

Recommended

Action

For a dual CP system, run the firmwareDownload command to load compatible firmware on the

standby CP. For details on this command, refer to the Fabric OS Command Reference.

Severity INFO

<timestamp>, [FSSM-1004], <sequence-number>,, INFO, <system-name>,

Incompatible software version in HA synchronization.