Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

720 Fabric OS Command Reference
53-1000599-02
Commands supported on the standby CP
4
logout Logs out from a Telnet, rlogin, or serial port session.
memShow Displays memory usage in the system.
myId Displays the current login session details.
more Displays command output with page breaks
netStat Displays network connections and statistics (UNIX command. No Fabric OS help
page.)
pdShow Displays information from panic dump file.
ping Displays the link operating mode for a network interface. (UNIX command. No
Fabric OS help page.)
ping6 Displays the link operating mode for a network interface. (Linnux command. No
FOS help page.)
reboot Reboots the standby CP.
setModem Enables or disables modem dial-in to a control processor (CP). Not supported on
the Brocade DCX.
supportSave Saves support information for RASLOG, TRACE, and supportShow.
switchName Displays this switch's name.
switchViolation Displays policy violations recorded in RAS log.
tsTimeZone Displays time zone.
upTime Displays how long the switch has been online.
version Displays firmware version.
TABLE 23 Commands supported on the standby CP (Continued)
Command Description