Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

630 Fabric OS Command Reference
53-1000599-02
supportShow
2
Operands This command has the following operands:
slotnumber/portnumber1-portnumber2
Specify the range of ports to display. If the
slotnumber/portnumber parameter is omitted, all ports in the switch display
in the per-port outputs. The slotnumber must be provided when specifying a
range of ports on multi-bladed products.
lines Specifies the number of lines of portLogDump output to display. If this
parameter is used, the slotnumber/portnumber parameter is required.
Examples To display switch information for debugging:
switch:admin> supportshow
Date:
Sun Feb 17 12:31:37 UTC 2008
Time Zone:
Time Zone Hour Offset: 0
Time Zone Minute Offset: 0
Version:
Kernel: 2.6.14.2
Fabric OS: v6.1.0_main_bld23
Made on: Wed Feb 13 06:59:17 2008
Flash: Thu Feb 14 18:38:31 2008
BootProm: 4.6.6
supportshow groups enabled:
os enabled
exception enabled
port enabled
fabric enabled
services enabled
security enabled
network enabled
portlog enabled
system enabled
extend disabled
filter disabled
perfmon disabled
ficon disabled
iswitch enabled
asic_db enabled
iscsi enabled
ag disabled
**** Begin start_port_log_cmd group ****
portlogdump:
time task event port cmd args
-------------------------------------------------
Thu Feb 14 18:43:12 2008
18:43:12.562 PORT debug 16 c48d6c7c,c48d6c78,c48d6c7c,abaa0f0f
18:43:21.821 FSSK event 0 0 00020000,00000000,00000000,COMP
18:43:22.022 FSSK event 0 0 00010000,00000000,00000000,COMP
(output truncated)
See Also supportFtp, supportSave, supportShowCfgDisable, supportShowCfgEnable, supportShowCfgShow,
traceDump