Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

530 Fabric OS Command Reference
53-1000599-02
portStatsClear
2
portStatsClear
Clears the hardware statistics of a port.
Synopsis portstatsclear [slot/]port
Description Use this command to clear the hardware statistics for a specified port. This command also clears
the hardware statistics for the associated three ports in the target port's quad, including
ALPA-based CRC monitor, End-to-End monitor, and Filter-based performance monitor statistics.
Inter-Switch Link (ISL) monitor statistics are not cleared by this command.
Note The execution of this command is subject to Admin Domain restrictions that may be in place. Refer
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability"
for details.
Operands This command has the following operands:
slot For bladed systems only, specify the slot number of the port to be cleared,
followed by a slash (/).
port Specify a port number to be cleared, relative to its slot for bladed systems.
Use switchShow to display a list of valid ports.
Examples To clear hardware statistics for a port:
switch:admin> portstatsclear 4/15
See Also portStats64Show, portStatsShow