Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

282 Fabric OS Command Reference
53-1000599-02
iodDelayReset
2
iodDelayReset
Resets the user-defined IOD delay settings to default values.
Synopsis ioddelayreset domain_id
Description Use this command to reset the user-defined IOD delay settings to default values (-1). This
command resets IOD delay values for a specified domainID that was previously configured with the
iodDelaySet command. When IOD delay is not configured or reset, the system uses its own internal
algorithm to calculate the IOD delay.
The switch must be disabled before IOD delay can be set.
Note The execution of this command is subject to Admin Domain restrictions that may be in place. Refer
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability"
for details.
Operands none
Examples To reset IOD delay to default values for domain 10:
switch:admin> ioddelayreset 10
See Also iodSet, iodReset, iodShow, iodDelaySet, iodDelayShow