Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

Fabric OS Command Reference 103
53-1000599-02
diagDisablePost
2
diagDisablePost
Disables power-on self-test (POST).
Synopsis diagdisablepost
Description Use this command to disable POST. A reboot is not required for this command to take effect.
Note The execution of this command is subject to Admin Domain restrictions that may be in place. Refer
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability"
for details.
Operands none
Examples To disable the POST during future power ons:
switch:admin> diagdisablepost
Config update Succeeded
Diagnostic POST is now disabled.
See Also diagEnablePost