Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
31-23
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 31 Troubleshooting Your Fabric
FC ID Allocation for HBAs
Figure 31-15 Setting Secondary MAC Addresses
Step 4
Enter the secondary MAC address in the Secondary Mac Base field.
Step 5 Enter the range for the secondary MAC address in the Secondary Mac Range field.
Step 6 Click the Apply Changes icon.
Displaying WWN Information
To display the status of the WWN configuration, perform this task:
Step 1 Select a SAN (or a VSAN) from the Logical Domains pane.
You see a list of switches in the Information pane.
Step 2 Choose Switches > FC Services > WWN Manager from the Physical Attributes pane.
You see the WWN information for each switch in the SAN or VSAN.
FC ID Allocation for HBAs
Fibre Channel standards require a unique FC ID to be allocated to an N port attached to a Fx port in any
switch. To conserve the number of FC IDs used, Cisco Nexus 5000 Series switches use a special
allocation scheme. See the “FC ID Allocation for HBAs” section on page 31-23.
Default Settings
Table 31-2 lists the default settings for the features included in this chapter.
Table 31-2 Default Settings for Advanced Features
Parameters Default
CIM server Disabled
CIM server security protocol HTTP
D_S_TOV 5,000 milliseconds