Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.3(2) (OL-14116-10 C0, November 2008)

Send documentation comments to [e-mail]
9
Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.3(2)
OL-14116-10
Software Download Process
Note Refer to the “Determining Software Compatibility” section of the Cisco MDS 9000 Family CLI
Configuration Guide for more details.
Note If you would like to request a copy of the source code under the terms of either GPL or LGPL, please
send an e-mail to [e-mail].
Selecting the Correct Software Image for an MDS 9100 Series Switch
The system and kickstart image that you use for an MDS 9100 series switch depends on which switch
you use, as shown in Table 3.
Selecting the Correct Software Image for an MDS 9200 Series Switch
The system and kickstart image that you use for an MDS 9200 series switch depends on which switch
you use, as shown in Table 4.
Selecting the Correct Software Image for an MDS 9500 Series Switch
The system and kickstart image that you use for an MDS 9500 Series switch depends on whether the
switch is based on a Supervisor-1 module or a Supervisor-2 module, as shown in Table 5.
Use the show module command to display the type of supervisor module in the switch. For a
Supervisor-1 module, the output might look like this:
Table 3 Software Images for MDS 9100 Series Switch
Switch Image
MDS 9120 or MDS 9140 Filename begins with m9100-s1ek9
MDS 9134, MDS 9124, Cisco Fabric Switch for
HP BladeSystem, or Cisco Fabric Switch for IBM
BladeCenter
Filename begins with m9100-s2ek9
Table 4 Software Images for MDS 9200 Series Switches
Switch Image
MDS 9222i Filename begins with m9200-s2ek9
MDS 9216A or MDS 9216i Filename begins with m9200-ek9
Table 5 Software Images for Supervisor Type
Supervisor Type Switch Image
Supervisor-1 module MDS 9506 and 9509 Filename begins with m9500-sf1ek9
Supervisor-2 module MDS 9506, 9509, and 9513 Filename begins with m9500-sf2ek9