Brocade Fabric OS v7.2.1a Release Notes v1.0

Closed with Code Change in Fabric OS v7.2.1
Fabric OS v7.2.1a Release Notes v1.0 Page 50 of 55
Defect ID:
DEFECT000468152
Technical Severity:
High
Summary:
after zone change nszonemember missing members and ports show HARD_PORT dhp bit set: 1
Symptom:
A zoning change (removal) was made from the core switch at which time the name server stopped
responding, causing outages on the hosts.
Workaround:
Allow 5 minutes delay between cfgsave and cfgenable command
Risk of Fix:
Low
Probability:
Low
Feature:
FOS Software
Function:
Fabric Services
Reported In Release:
FOS7.0.2
Service Request ID:
1202661,1249899,7610
Defect ID:
DEFECT000468188
Technical Severity:
High
Summary:
Observed MDD kept crashing when a DS was set persistently disabled
Symptom:
User may see MDD hit rolling crashing when the switch is configure VF mode and the DS switch is
set disable persistently with MAPS enabled.
Risk of Fix:
High
Probability:
Low
Feature:
Advanced Monitoring Services
Function:
Other
Reported In Release:
FOS7.2.0
Defect ID:
DEFECT000468413
Technical Severity:
High
Summary:
firmwaredownload -s on standby CP produces protocol failure in circuit setup messages on the
console
Symptom:
Firmware download on the standby CP takes a long time to reach Y/N prompt and several "poll:
protocol failure in circuit setup" console messages resulted.
Risk of Fix:
High
Probability:
Low
Feature:
Striker/Spike Platform Services
Function:
VEX
Reported In Release:
FOS7.2.0
Defect ID:
DEFECT000468455
Technical Severity:
High
Summary:
QoS allowed ASIC buffer pool to become over allocated
Symptom:
Portbuffershow indicated a negative value in the remaining buffers after QoS was enabled on an
extended distance link
Risk of Fix:
Low
Probability:
Medium
Feature:
8G ASIC Driver
Function:
ASIC Driver
Reported In Release:
FOS7.2.0
Defect ID:
DEFECT000468777
Technical Severity:
Medium
Summary:
portcfgpersistentdisable -r does not persist the reason on reboot of a 7800
Symptom:
port reason does not persist across a reboot on a 7800 switch when portcfgpersistentdisable -r is
configured
Risk of Fix:
High
Probability:
Medium
Feature:
8G Platform Services
Function:
Other
Reported In Release:
FOS7.2.0
Defect ID:
DEFECT000468795
Technical Severity:
High
Summary:
FCIP FICON XRC Emulation Abort after Selective Reset Errors
Symptom:
If FICON XRC Emulation receives a Selective Reset for a device that is currently in Stacked Status
State, the Selective Reset is incorrectly responded to by emulation processing leading to an abort
sequence from the channel for the Selective Reset Exchange.
Risk of Fix:
High
Probability:
Low
Feature:
FCIP
Function:
Emulation
Reported In Release:
FOS7.0.0
Service Request ID:
1205859