Brocade Fabric OS Command Reference v7.1.0 (53-1002746-01, March 2013)

Fabric OS Command Reference 1059
53-1002746-01
topologyShow
2
Total Bandwidth
The maximum bandwidth of the out port. A bandwidth that is less than 0.512 Gbps
is adjusted to the nearest power of 2 value. A bandwidth in the range of 0.512
Gbps (included) to 1 Gbps (not included) is adjusted to the 0.512 Gbps value. No
adjustment takes place if the bandwidth is greater or equal to 1 Gbps.
Bandwidth Demand
The maximum bandwidth demand by the in ports.
Flags
Always D, indicating a dynamic path. A dynamic path is discovered automatically
by the FSPF path selection protocol.
NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS The following operand is optional:
domain
Specify the destination domain for which to display the topology information.
EXAMPLES To display the topology on a single switch: domain is local, details are not displayed.
switch:user> topologyshow
1 domains in the fabric; Local Domain ID: 97
When executed from an edge fabric, topologyshow displays details for all domains, including local
domains and local translate domains:
switch:user> topologyshow
6 domains in the fabric; Local Domain ID: 7
Domain: 1
Metric: 10500
Name: fcr_xd_1_1
Path Count: 1
Hops: 2
Out Port: 11
In Ports: 0 1 2 3 4 5 6 7 8 9 15
Total Bandwidth: 8.000 Gbps
Bandwidth Demand: 1275 %
Flags: D
Domain: 2
Metric: 1000
Name: fcr_fd_2
Path Count: 1
Hops: 2
Out Port: 15
In Ports: 0 1 2 3 4 5 6 7 8 9 11
Total Bandwidth: 2.000 Gbps
Bandwidth Demand: 4000 %
Flags: D
Domain: 3
Metric: 10500