StoreEver LTO SAS full height tape drives user guide

invokes OBDR to restore your system. For more information and specific instructions please
refer to our World Wide Web site at http://www.hp.com/go/obdr.
3. Follow the on-screen instructions to set up the operating system. Normally, you can accept the
default response to all the prompts, for example just press <Enter>.
4. The LEDs will flash in OBDR mode (flashing-steady on-flashing) while the tape drive restores
your operating system to a state where it can run a normal data restore.
5. Once the operating system has been set up and rebooted, the Ready LED display on the tape
drive changes to constant green and you can remove the backup cartridge, if you wish. You
are now ready to run a normal data restore. Follow the normal process for your restore
application.
If restore fails
If the restore fails for any reason, refer to our World Wide Web site (http://www.hp.com/go/
obdr) and do a search on “OBDR” for detailed troubleshooting information.
44 Using HP OBDR