HP ProLiant Storage Server with Windows Storage Server 2003 R2 - Release Notes (5697-6072, September 2006)

Additional applications and utilities
Description
Creating a volume using the Create a New LUN wizard and also selecting
the Create Volume option on Storage Manager for SAN launched from the
HP Storage Server Management console sometimes results in a message
stating Storage Manager for SANs was able to create the LUN,
but could not create the volume because the disk did not
arrive in 5
minutes.
Workaround
Use
the Array Configuration Utility (ACU) to create the LUN and then use the Disk
Manager utility on the Windows storage server to create the LUN volume.
Issue:
VDS provider for MSA does not refresh after volume creation fails
Description
Creating a LUN and volume using the Create a New LUN wizard using Storage
Manager for SAN resu lts in the volume creation failing and displays a warning
icon on the created volume in the Storage Manager for SAN user inter face.
The warning icon continues to display even after closing and re-opening the HP
Storage Server Management console. Attempting to delete the LUN resu l ts in the
Storage M anager for SAN user interface becoming unresponsive and unable to
proceed past the delete LUN dialog box.
Workaround
Do one of the following:
• Restart the system to load the LUNs and to refr esh Storage Manager for SAN.
• Use the Array Configuration Utility (ACU) to create the LUN on the MSA, and
then use the Disk Manager utility on the Windows storage server to create
the LUN volume.
Issue:
Storage Manager for SAN stops responding when Subsystem is selected
Description
When Su
bsystem is clicked in Storage Manager for SAN, the system stops
respo
nding and displays the message MMC has detected an error in a
snap-in and will unload
it. This behavior is seen only when any of the
MSA subsystem volumes are being expanded.
Workaround
Use
the Array Configuration Utility (ACU) to access the MSA subsystem when
volumes are being expanded.
Issue:
Availability of Special Administration Console (SAC) c ommands for the DL100 G2 storage server
Description
SAC is a component of Microsoft’s Emergency Management Services technology
in Windows Server 2003 that supports remote management and system recovery
for servers not accessible th rough an in-b and connection, such as a local area
network (LAN) or Internet. SAC is a command-line environment accessed during
the startup process. The SAC c ommands are available at the following web site:
h
ttp://www.microsoft.com/technet/prodtechnol/windowsserver2003/library/
ServerHelp/2acd37af-5439-4789-924c-14e1040cf5a0.mspx.
Workaround Not applicable.
I
ssue:
Cannot connect to Ser ver Management Software (SMS) service on the DL100 G2 from a remote
client
Description
If the
Yahoo Toolbar is installed on a Windows client using Internet Explorer, the
client cannotconnect to theSMS serviceonthe DL100 G2 storageserver.
Workaround
In
order to connect to SMS on the DL100 G2 storage server from a remote
Windows client, ensure the Yahoo Toolbar is not installed, or uninstall the Yahoo
Toolbar from theclientbeforeconnecting toSMS.
Issue:
Adaptec Storage M anager fails to display information on the local system
14