HP StorageWorks 2300 Modular Smart Array CLI reference guide (500912-001, January 2009)

HP StorageWorks 2300 Modular Smart Array CLI reference guide 127
show enclosures
Description Full detail available in API output only. Shows information about the enclosures in the storage system.
Syntax
show enclosures
Output Encl
Enclosure ID
Encl WWN
Enclosure WWN
Name
Enclosure name
Location
Enclosure location; blank if not set
Rack
Number of the rack containing the enclosure
Pos
Position of the enclosure in the rack
Vendor
Enclosure vendor
Model
Enclosure model
EMP # BUS:ID Rev
Address and firmware revision of the Enclosure Management Processor in each controller's
Expander Controller
Example Show information about the enclosures:
# show enclosures
Encl Encl WWN Name Location Rack Pos
Vendor Model EMP A BUS:ID Rev EMP B BUS:ID Rev
--------------------------------------------------------------------------
1 500C0FF00000133C Enclosure 1 0 0
vendor model 0:31 1030 1:31 1030
--------------------------------------------------------------------------
See also • set enclosure
• show enclosure-status