HP StorageWorks RDX Removable Disk Backup System User Guide (484933-001, June 2008)

Figure 5 Conn ect ing to a standard US B port
If your server has a special USB port, use the supplied, special USB cable, as illustrated in
Figure 6 on page 17. Select the special cable that is appropriate for the pin layout on the
USB port.
Figure 6 Connecting to a special USB port
Attach
USB and power cable to the RDX Removable Disk Backup System
NOTE:
The drive is not powered from the USB bus. It must be connected to the server’s power supply.
1. Connect the Type B (square) connector on the USB cable to the internal RDX Removable Disk
Backup System.
RDX Removable Disk Backup System
17