HP ProLiant Storage Server with Windows Storage Server 2003 R2 - Release Notes (5697-6072, September 2006)

Microsoft Windows Ser ver 2003 R2
This section describes issues related to Microsoft Windows Server 2003 R2.
Microsoft Wi
ndows S erver 2003 R2
Issue:
Quotas used
Description
If
files for user accounts are deleted using the local login account, this has the
effect of moving user files to the recycle bin instead of removing them from the
drive. Due to the nature of volume-based quotas (instead of directory-based) this
has
the effect of not releasing quota space.
Workaroun
d
Delete files from the Recycler and/or remove the recycle bin fro m the data drives.
Issue:
Bugcheck 0x50 (PAGE_FAULT_IN_NONPAGED_AREA) in next boot after disabling Multipath
Support
Description
Using the Microsoft Device Manager to disable the HP MPIO driver and rebooting
the
system causes the system to continuously reboot. After successfully installing
the
MPIO and DSM for MSA/EVA/XP, right-click and disable Multipath Support
from Device Manager and reboot the system. During the nex t boot, the system
bugchecks with b ugcheck code 0x50 when coming up. The issue occurs because
the
DSM uses MPIO export DsmGetVersion. This call is made even before the DSM
registers with MPIO. Since MPIO is disabled, DsmGetVersion is not available,
and
the system bugchecks. The uninstall driver selection u nder Device Manager
works fine.
Workaround
Bring up the Safe Mode menu using F8 during the reboot sequence. Select Last
Known Good Configuration to recover the system, or boot into the recovery console
and
disable the DSM service.
Issue:
AppleTalk share access problem while using Apple encrypted protocol
Description
Users may experience problems in accessing AppleTalk shares using Apple
encrypted protocol.
Workaround Switch to Apple Clear Text protocol.
R2 upgrade
This section describes issues related to the upgra de for Windows Storage Server 2003 R2.
R2 upgrade
Issue:
R2 upgrade requires Windows Server 2003 CD
Description
When
upgrading to Windows Storage Server 2003 R2, you are prompted to
i
nsert the Windows Server 2003 CD because files cannot be located. There
a
re
usually two files that cannot be located during the initial upgrade and one
file when finalization occurs.
Workaround
The files are located on the CD under the i386 folder. To access a file:
1. Click OK.You arepromptedfor alocation.
2. Click Browse, and then locate the file in the i386 folder.
3. Click Open,and then click OK.
Issue:
The iSCSI Feature Pac k must be uninstall ed prior to upgrading to R2
Description
The iSCSI Feature Pack is uninstalled when upgrading to Windows Storage Server
2003 R2 because it can only be managed through the WebUI.
Storage Server with Windows Storage Server 2003 R2
5