HP ProLiant Storage Server with Windows Storage Server 2003 R2 release notes (March 2006)

Storage Server with Windows Storage Server 2003 R2 release notes 11
Issue: A blue screen occurs on the DL100 G2 if rebooted during resynchronization of the storage
volume
Description If the DL100 G2 storage server (software RAID models only) is rebooted while
the storage volume in Microsoft Disk Management displays a “Resynching”
status, a blue screen may occur on the storage server during startup.
WARNING! Do not shut down or reboot the DL100 G2 storage server
(software RAID models only) when actions have been taken using Microsoft Disk
Management to resynchronize the storage volume, and the volume status
displays “Resynching.” Wait until the storage volume displays “Healthy” before
rebooting or shutting down the system. Resynchronization may take some time,
depending on the size of the volume. Although you can access a volume while
synchronization is in progress, do not make any configuration changes to the
storage during resynchronization.
Workaround A recovery of the storage server must be performed using the System Installation
and Recovery DVD.
Issue: System time may differ from Summary screen of Rapid Startup Wizard
Description The system time shown in the Summary screen of the Rapid Startup Wizard may
differ from the actual system time after completing the wizard. This occurs when
the system time has not been changed in the Date/Time page, but a different
time zone has been selected.
Workaround Use the Data/Time property page to set the correct time.