HP ProLiant Storage Server with Windows Storage Server 2003 R2 release notes (March 2006)

18
System installation and recovery process
This section describes issues related to installing the operating system or the recovery process.
Issue: After performing installation or recovery, the machine boots again to the System
Installation and Recovery menu rather than the Windows logon screen
Description If the recovery DVD is left in the drive of an ML310 G3 storage server, the system
will boot again from the DVD, even though the installation or recovery process is
complete.
Workaround Remove the DVD and reboot the machine
Issue: After restoring the system with the System Installation and Recovery DVD, the data drive
may be seen by Windows as a foreign disk
Description If the data drive was a dynamic disk prior to performing a system recovery, the
disk may be designated as a foreign disk by Windows after the recovery. This
issue is seen in the Disk Management MMC snap-in.
Workaround Open the Disk Management snap-in. Right-click on the foreign disk and select
Import disk.
Issue: NfsSvr logs an error in the event log
Description On systems with Windows Storage Server 2003 R2, the event log may contain
an error stating that Server for NFS failed to initialize on a non-existent drive
letter.
For example:
Event Type: ErrorEvent
Source: NfsSvr
Event Category: None
Event ID: 1066
Description: Server for NFS failed to initialize on volume
with drive letter F:
Workaround This error does not affect the performance of NFS. The issue will be resolved in a
later HP ProLiant Storage Server release.