Reference Guide

– Print range: Select the beginning and the end of the print range using the
Select Photos arrows.
– Print index page: Print thumbnail views of all photos on the inserted
memory card.
– Print panoramic photos: Select to turn panoramic printing On or Off
(default). Select On to print all selected photos with a 3:1 aspect ratio; load
10 x 30 cm (4 x 12 inch) paper before printing.
– Print stickers: Select to turn sticker printing On or Off (default). Select On to
print 16 photos per page; load special sticker media if desired.
– Passport photo mode: Select to turn passport photo mode On or Off. If you
select On, the printer prompts you to select the passport photo size.
Passport mode tells the printer to print all photos in the selected size. Each
page contains one photo; however, if you specify several copies of the same
photo, they all appear on the same page (if enough space is available). Allow
photos to dry for one week before laminating.
● Edit
– Remove red-eye: Select to remove red eye from the photo displayed on the
printer screen.
– Photo brightness: Use the Navigation arrows to increase or decrease the
photo brightness.
– Add frame: Use the Navigation arrows to select a pattern and a color for a
frame.
– Add color effect: Use the Navigation arrows to select a color effect. The
color effect does not affect frames created with the Add frame option.
● Tools
– View 9-up: View nine images at once from the inserted memory card.
– Slide show: Select to start a slide show of all the photos on the inserted
memory card. Press Cancel to stop the slide show.
– Print quality: Choose either Best (default) or Normal print quality.
– Print sample page: Select to print a sample page, which is useful for
checking the print quality of the printer. This feature is not available in all
printer models.
– Print test page: Select to print a test page containing information about the
printer that can help in troubleshooting problems.
– Clean printheads: Select to clean the print head when white lines or streaks
appear in your printouts. After the cleaning finishes, the printer prints a self
test report. You have the option to clean the print head again if the report
shows print quality problems.
– Align printer: Select to align the printer when white lines or streaks appear
in your printouts.
● Bluetooth
– Device Address: Some devices with Bluetooth wireless technology require
you to enter the address of the device they are trying to locate. This menu
option shows the printer address.
– Device Name: You can select a name for the printer that appears on other
devices with Bluetooth wireless technology when they locate the printer.
– Passkey: When the Bluetooth Security level of the printer is set to High,
you must enter a passkey to make the printer available to other Bluetooth
devices. The default passkey is 0000.
Chapter 1
8 HP Photosmart 8200 series