HP Photosmart 7600 series - (English) Setup Guide

1
2
3
HP #57
HP #58
Q3010-90153
hp photosmart
7600 series
setup
guide
4
Paper length guide
Paper width guide
In tray
plug in the power cord
select your language
1. Press the ON button to turn on the printer.
2. When Select Language? appears on the
printer’s LCD screen, press the OK button.
3. Press the MENUorbutton to highlight
your language. Press the OK button to
select your language, then press the OK
button again to confirm.
4. When Select Country/Region? appears on
the printer’s LCD screen, press the OK
button.
5. Press the MENUorbutton until the
desired country or region appears on the
printer’s LCD screen. Press the OK button
to select your country or region.
unpack your printer
Note: Purchase a USB cable separately.
See the HP Photosmart Basics Guide for
a description of the items included with
your printer.
load plain paper in the in tray
1. Lift the paper catch.
2. Pull out the paper length guide on the In tray and
slide the paper width guide as far to the left as it
will go.
3. Place a stack of plain paper in the In tray.
4. Adjust the paper width guide and paper length
guide to fit close to the edges of the paper without
bending the paper.
5. Lower the paper catch.
6. Make sure that the photo tray slider is pulled
forward (toward you). This disengages the photo
tray.
Note: Store photo paper in the resealable storage bag
provided.
Photo tray slider
OK button
Menu button
Paper catch
On button
*Q3010-90153*
Windows PC: Do not connect the printer to
your computer with the USB cable until
prompted by the installation software.
Macintosh: Do not connect the printer to
your computer with the USB cable until the
software installation has finished.