HP Photosmart 7200 series - (English) Basics Guide

hp photosmart 7200 series
chapter 4
34
3 When you connect the digital camera to the printer, a Print Setup menu
appears on the camera’s LCD screen. Use this menu to:
– Change the photos you have selected for printing
– Select the paper type
– Select the paper size
4 When you are ready to print, follow the instructions on your camera’s LCD
screen.
Note: For more information about using camera-selected photos, see the
documentation that came with your digital camera.
Note: For best results, be sure to load photo paper into the In tray or the
photo cassette before printing.
For more information about printing from a memory card, see print from the
control panel on page 24.
connect your notebook computer to the direct-printing port
To print the photos or files from your notebook computer using the direct-printing
port, the files must already be saved on your notebook computer.
You must install the HP Photosmart 7200 Series printer software on your
notebook computer to print using the front port. For information about installing
the software on your notebook computer, see the reference guide that came with
your printer.
To print from your Windows notebook computer:
1 Connect one end of a USB cable to the notebook computer, then connect
the other end of the cable to the direct-printing port located on the front of
the printer. The direct-printing port is located to the left of the control panel
buttons.
2 Using your software application, open the file you want to print.
3 From the File menu of the software application, select Print.