HP Photosmart 320 series - (English) User Guide

Improving the quality of your photos
The HP Photosmart 320 series printer provides a variety of preferences and effects
that can improve the quality of your printed photos. The settings do not change your
original photo. They only affect printing.
Problem and solution
How to do it
Blurred photos
Smart Focus
Sharpen blurred photos. It is turned on
by default. Use these instructions to turn
it on if it is currently off. This preference
affects all printed photos.
1. Remove any memory cards, then
press
or .
2. Select Preferences, then press OK.
3. Select Smart Focus, then press OK.
4. Press
or to highlight On, then
press OK.
Photos with poor lighting and contrast
Digital Flash
Improve the lighting and contrast in
prints. This preference affects all printed
photos.
1. Remove any memory cards, then
press
or .
2. Select Preferences, then press OK.
3. Select Digital Flash, then press OK.
4. Press
or to highlight On, then
press OK.
Printing your photos
Printing your photos involves three steps: selecting a print layout, setting print quality,
and selecting a print method.
Selecting a layout
The printer prompts you to select a print layout each time you insert a memory card.
Layout options
Do this
1. Insert a memory card.
2. Use
or to select a layout:
– Print one photo per sheet
– Print two photos per sheet
– Print four photos per sheet
3. Press OK.
The printer may rotate your photos
to fit the layout.
Note When borderless printing is
turned off, all pages print with a narrow
white border around the outside edges
of the paper. To turn off borderless
printing, see Printer menu.
Chapter 3
24 HP Photosmart 320 series