11.0 HP StoreVirtual Storage VSA Installation and Configuration Guide (TA688-96141, September 2013)

2. Click Find Systems on the Getting Started Launch Pad.
In the Find Systems window, use these features to control the list of storage systems:
• Clear Auto Discover by Broadcast to prevent the entire subnet of storage systems from
appearing in the Navigation pane.
• If your storage systems are on another subnet, add individual IP addresses of storage
systems that you want to appear in the Navigation pane.
Figure 4 Editing Find Systems to control the storage systems displayed
1. Clear Auto Discover by Broadcast
2. Add IP addresses for specific storage systems
Verifying the hardware configuration
Ensure that the hardware configuration is correct before adding the StoreVirtual VSA to a
management group. Select the StoreVirtual VSA in the Navigation pane to expand the hardware
configuration categories. Verify that RAID Stripe is configured. Verify that the network settings are
correct.
22 Getting started with HP StoreVirtual Storage