HP StorageWorks P4000 G2 Unified NAS Gateway User Guide (5697-0624, November 2010)

• Activating iLO 2 Advanced features using a license key—The Remote Console feature of iLO 2
requires a license key. The key is included with the storage system inside the Country Kit. See the
iLO 2 Advanced License Pack for activation instructions.
• Adjusting logging settings for system, application, and security events.
• Installing third-party software applications such as an antivirus application.
• Registering the server — To register the server, refer to the HP Registration website (http://re-
gister.hp.com).
Additional access methods
After the storage system installation process is complete and the system's IP address has been assigned,
you can then additionally use the remote browser, Remote Desktop, and Telnet Server methods to
access the storage system.
Using the remote browser method
The storage system ships with DHCP enabled on the network port. If the server is placed on a
DHCP-enabled network and the IP address or server name is known, the server can be accessed
through a client running Internet Explorer 5.5 (or later) on that network, using the TCP/IP 3202 port.
IMPORTANT:
Ensure that you have the following:
• Windows-based PC loaded with Internet Explorer 5.5 (or later) on the same local network as the
storage system
• DHCP-enabled network
• Server name or IP address of the storage system
To connect the server to a network using the remote browser method, ensure that the client is configured
to download signed ActiveX controls.
To connect the storage system to a network using the remote browser method
1. On the remote client machine open Internet Explorer and enter https:// and the server name
of the storage system followed by a hyphen (-), and then:3202. For example, https://
labserver-:3202.
NOTE:
If known, you can substitute the IP address for the server name. For example:
192.100.0.1:3202.
2. Click OK on the Security Alert prompt.
3. When prompted, log on to the storage system with the administrator user name and password.
Installing and configuring the server20