HP StoreVirtual Recovery Manager Deployment Guide (AX696-96328, September 2013)

Opening the Manage Group Credentials dialog box
Do one of the following:
• Select File→Manage Group Credentials from the menu bar.
• From the Manage Snapshots window, click Add to open the Manage Group Credentials
dialog box.
• From the Auto-Mount Policies window, click Add Policy. Then click Add to open the Manage
Group Credentials dialog box.
Adding credentials
You can add a management group using an IP address or the management group name.
Adding a management group by IP address
1. Select Add Management Group By IP.
2. Enter either an IP address associated with a storage system in the management group, or the
virtual IPs (VIPs) of the clusters in the management group. Use semicolons (;) to separate IP
addresses in the list.
TIP: HP recommends that you enter the VIPs. Entering the VIPs ensure that Recovery Manager
continues to display management group information if a storage system in the management
group is inaccessible.
3. Enter the user name and password, and confirm the password.
4. Click Test and wait for the message verifying that the credentials are valid.
5. Click OK to save the credentials.
6. Repeat these steps for additional management groups.
Adding a management group by name
1. Select Add Management Group By Name.
2. Click Discover.
The Recovery Manager performs a UDP broadcast on the local subnet and populates the list
with the discovered management groups.
3. Select the management group from the list.
4. Enter the user name and password, and confirm the password.
5. Click Test and wait for the message verifying that the credentials are valid.
6. Click OK to save the credentials.
7. Repeat these steps for additional management groups.
Editing credentials
1. Select Edit Cached Management Group Credentials from the Select Option list in the Manage
Group Credentials dialog box.
2. Select the management group from the list.
3. Edit the user name and/or password.
4. Click Test and wait for the message verifying that the changed credentials are valid.
5. Click OK to save the credentials.
6. Repeat these steps for additional management groups.
6 Using the HP StoreVirtual Recovery Manager