- Hewlett-Packard Printer User Manual
Table Of Contents
- Contents
- Get started
- HP ePrint
- Work with ink cartridges
- Solve a problem
- HP support
- General troubleshooting tips and resources
- Solve printer problems
- Print quality troubleshooting
- Solve paper-feed problems
- Solve problems using HP ePrint and HP websites
- Solve Ethernet network problems
- Solve wireless problems
- Basic wireless troubleshooting
- Advanced wireless troubleshooting
- Step 1: Make sure your computer is connected to your network
- Step 2: Make sure that the printer is connected to your network
- Step 3: Check to see if the firewall software is blocking communication
- Step 4: Make sure the printer is online and ready
- Step 5: Make sure the wireless version of the printer is set as the default printer driver (Windows ...
- Step 6: Make sure your computer is not connected to your network over a Virtual Private Network (VPN ...
- After resolving the problems
- Configure your firewall software to work with the printer
- Solve printer management problems
- Troubleshoot installation issues
- Understand the printer status report
- Understand the network configuration page
- Printhead maintenance
- Clear jams
- Control panel lights reference
- Technical information
- Warranty information
- Printer specifications
- Physical specifications
- Product features and capacities
- Processor and memory specifications
- System requirements
- Network protocol specifications
- Embedded web server specifications
- Media specifications
- Print specifications
- HP ePrint and HP website specifications
- Environmental specifications
- Electrical specifications
- Acoustic emission specifications
- Regulatory information
- FCC statement
- Notice to users in Korea
- VCCI (Class B) compliance statement for users in Japan
- Notice to users in Japan about the power cord
- GS Declaration (Germany)
- Gloss of housing of peripheral devices for Germany
- European Union Regulatory Notice
- Regulatory information for wireless products
- Regulatory model number
- Environmental product stewardship program
- Paper use
- Plastics
- Material safety data sheets
- Recycling program
- HP inkjet supplies recycling program
- Disposal of waste equipment by users in private households in the European Union
- Power consumption
- Chemical Substances
- Battery information
- EU battery directive
- RoHS notices (China only)
- RoHS notices (Ukraine only)
- Third-party licenses
- HP supplies and accessories
- Network setup
- Change basic network settings
- Change advanced network settings
- Set up the printer for wireless communication
- Before you begin
- Set up the printer on your wireless network
- Set up the printer using the HP printer software (Recommended)
- Set up the printer using WiFi Protected Setup (WPS)
- Set up the printer using the embedded web server (EWS)
- Change the connection type
- Test the wireless connection
- Guidelines for ensuring wireless network security
- Guidelines for reducing interference on a wireless network
- Uninstall and reinstall the HP software
- Printer management tools
- Index
Do not use SETUP cartridges
SETUP cartridges cannot be used after the printer has been initialized. Remove and install non-
SETUP cartridges. For more information, see
Replace the ink cartridges.
New printhead low on ink
The used cartridges listed in the message might not have enough ink to complete one-time startup
processes.
Solution: Install new cartridges that came with your replacement printhead or click Continue to use
installed cartridges.
If startup cannot complete with installed cartridges, new cartridges will be needed. For information
on how to install new cartridges, see
Replace the ink cartridges.
Use black ink only?
The cartridges listed in the message are low on ink.
Solutions: To print in color, replace the empty cartridges. For information about how to install new
cartridges, see
Replace the ink cartridges.
To temporarily print using Black ink only, click Use Black Only. The printer will replace color with
grayscale. The empty cartridges will need to be replaced soon.
CAUTION: Do not remove the empty cartridge to print in black-ink only mode.
Use color ink only?
The black cartridge is low on ink.
Solutions: To temporarily replace black with color, click Use Color Only. Black will be simulated.
Text and photo quality will differ from those printed when using all cartridges. The black cartridge
will need to be replaced soon.
CAUTION: Do not remove the empty cartridge to print in color-ink only mode.
To print with black, replace the black ink cartridge. For information about how to install new
cartridges, see
Replace the ink cartridges.
Incompatible ink
The printer has detected that the type of ink in the cartridges listed in the message is incompatible
with the ink system for the printer and can cause serious harm to the printhead.
Solution: Remove this cartridge immediately and replace with a compatible ink cartridge. For
information about how to install new cartridges, see
Replace the ink cartridges.
Ink sensor warning
The ink sensor is reporting an unexpected condition. This could be caused by the cartridge, or the
sensor may have failed. If the sensor has failed, it can no longer sense when your cartridges are low
on ink. Printing with an empty cartridge will cause air to enter the ink system, which causes poor
print quality. Significant amounts of ink will be used up to recover from this condition, which will
deplete much of the ink supply for all cartridges.
Solution: Click OK to continue printing or replace the cartridge. For information about how to install
new cartridges, see
Replace the ink cartridges.
Appendix F
136 Errors (Windows)