User Guide

Set the fax error correction mode

Typically, the device monitors the signals on the phone line while it is sending or

receiving a fax. If it detects an error signal during the transmission and the error-

correction setting is on, the device can request that a portion of the fax be resent.

Turn off error correction only if you are having trouble sending or receiving a fax, and

you want to accept the errors in the transmission. Turning off the setting might be

useful when you are trying to send a fax to another country/region or receive a fax

from another country/region, or if you are using a satellite phone connection.

To set the fax error-correction mode

▲ Device control panel: Press Fax Menu, open the Advance Fax Setup menu,

and then use the Error correction mode option.

Set the dial type

Use this procedure to set tone-dialing or pulse-dialing mode. The factory-set default is

Tone. Do not change the setting unless you know that your phone line cannot use

tone dialing.

NOTE: The pulse-dialing option is not available in all countries/regions.

To set the dial type

▲ Device control panel: Press Setup, press Basic Fax Setup, and then use the

Tone or Pulse Dialing option.

Set the redial options

If the device was unable to send a fax because the receiving fax machine did not

answer or was busy, the device attempts to redial based on the settings for the busy-

redial and no-answer-redial options. Use the following procedure to turn the options on

or off.

• Busy redial: If this option is turned on, the device redials automatically if it

receives a busy signal. The factory-set default for this option is ON.

• No answer redial: If this option is turned on, the device redials automatically if the

receiving fax machine does not answer. The factory-set default for this option is OFF.

To set the redial options

▲ Device control panel: Press Setup, press Advance Fax Setup, and then use the

Busy Redial or No Answer Redial options.

Set the fax speed

You can set the fax speed used to communicate between your device and other fax

machines when sending and receiving faxes. The default fax speed is Fast.

Change fax settings