HP Surestore NAS 8000 Command Reference Manual

Command Reference 27
getStorageDasdScsiLunRedundancygroup
Returns the redundancy group number that this DASD LUN is on. This command should only be
used on LUNs that are on an HP VA7xxx storage array.
■
inParam[0] = SCSI LUN name
■
outParam[0] = Redundancy group number
getStorageDasdScsiLunNumber
Returns the number of the specified LUN.
■
inParam[0] = SCSI LUN name
■
outParam[0] = LUN number
getStorageDasdScsiLunCapacity
Returns the capacity of the specified LUN.
■
inParam[0] = SCSI LUN name
■
inParam[1] = Units (B,MB,GB)
■
outParam[0] = LUN capacity (MB - unless overridden by inParam[1])
getStorageDasdScsiLunInUse
Informs whether the specified LUN is in use, that is, whether it is part of a volume group.
■
inParam[0] = SCSI LUN name
■
outParam[0] = T (in use) or F (Not in use)
getStorageDasdScsiLunDasd
Returns the name of the specified LUN.
■
inParam[0] = SCSI LUN name
■
outParam[0:N] = DASD name