HP StorageWorks MSL4048 Tape Library firmware release notes Firmware version 7.
Legal and notice information © Copyright 2011 Hewlett-Packard Development Company, L.P.
Version: 7.80 Description This release includes updated firmware for the HP StorageWorks MSL4048 Tape Library. The firmware can be updated through any of the following methods: • Remote management interface (RMI). • Operator control panel (OCP) using a USB flash drive. • HP Library and Tape Tools (L&TT). Library firmware version 7.80 Compatible robotics firmware version Update recommendation Supersedes 3.10e Recommended All previous versions of Library firmware.
Version 7.70 • Fixed incorrect error messages when an Encryption Kit PIN is entered that is shorter than the required eight characters. Now, the correct response At least 8 characters are required for PIN! is displayed on an RMI screen dialog. Prior versions could display either The entered PIN is too long. A maximum of 15 characters are allowed for PIN! or Invalid key server token PIN is entered.
4. Click Firmware on the main toolbar. 5. On the Update Firmware tab, select the box next to each device for which you want to update firmware. If firmware is currently available for that device, it is shown in Firmware File in the File Selection section of the screen. 6. Click Start Update at the bottom of the screen to begin the update. Determining current version To find the version of firmware installed on the Library, see the RMI Support: Firmware screen or the OCP Info > Library Identity option.