HP StoreEver MSL2024, MSL4048, MSL8048, and MSL8096 Tape Libraries User and Service Guide (AK378-96059, December 2012)

2. Enter the administrator password if requested.
3. Pull all the magazines you want to remove out a few centimeters or inches to move them past
the latch.
4. Pull the magazines out one at a time.
5. The library cannot perform any other operation until the magazines are replaced. After
exchanging tapes in a magazine, slide the magazine completely into the library. Each
magazine locks into place after it is correctly installed. When all magazines are in place, the
library inventories the replaced magazines.
Using the remote management interface
To login, select the Administrator Account Type, enter the administrator password, and press Sign
In.
Figure 129 RMI login page
Go to the Operations: Magazines page. This page allows you to release the right, left, or both
magazines from the library.
Figure 130 Operations: Magazines page
204 Upgrading and servicing the tape library