MSL5000 and 6000 Series Tape Libraries User Guide

Operation
90 HP StorageWorks MSL5000 and MSL6000 Series Tape Libraries User Guide
Network Options
Selecting this option lets you view the settings defined from the Network option
in the Edit Options area (see Figure 48). Table 8 on page page 91 lists and
describes the available options.
Note: There are no firmware default settings for networks. Contact your network
administrator for specific information on connecting the library to your network.
Figure 48: Default view network options screen
Note: The IP Address, IP Mask, IP Gateway, and DNS Server become available after
selecting User Specified IP Address from the Network screen under Edit Options.
Data Transfer Speed Lets you set the robot or library SCSI data transfer rate to
Synchronous, 10 MB/sec, Synchronous, 5 MB/sec, or
Asynchronous Only. The default is Synchronous, 10
MB/sec.
Report Element Type The default is Disabled.
Fast Terminate
Sequence
The default is Disabled.
Table 7: View SCSI Options (Continued)
Option Description