MSL5000 and 6000 Series Tape Libraries User Guide

Troubleshooting
161HP StorageWorks MSL5000 and MSL6000 Series Tape Libraries User Guide
503D Drive Status Fail
(Cleaning operation failed because the
library could not retrieve drive status.)
■ Press the Enter button to clear the
message.
■ Invalid user initiated operation. Set
parameters correctly and try again.
■ Ensure the drive shows good status
through the drive status window.
7001 Command response from
unexpected source
■ Press the Enter button to reboot.
■ Cycle power to the library or reboot using
the GUI touch screen.
7002 Control command execution
failed
■ Press the Enter button to reboot.
■ Cycle power to the library or reboot using
the GUI touch screen.
7003 Control response not matched
to a known command
■ Press the Enter button to reboot.
■ Cycle power to the library or reboot using
the GUI touch screen.
7004 Loader response not matched to
a known command
■ Press the Enter button to reboot.
■ Cycle power to the library or reboot using
the GUI touch screen.
7005 Drive response not matched to
a known command
■ Press the Enter button to reboot.
■ Cycle power to the library or reboot using
the GUI touch screen.
7006 Flash response not matched to
a known command
■ Press the Enter button to reboot.
■ Cycle power to the library or reboot using
the GUI touch screen.
7007 Drive index on Update Status
message was invalid
■ Press the Enter button to reboot.
■ Cycle power to the library or reboot using
the GUI touch screen.
■ Ensure the drive shows good status
through the drive status window.
7008 The Drive response was not
expected
■ Press the Enter button to reboot.
■ Cycle power to the library or reboot using
the GUI touch screen.
■ Ensure the drive shows good status
through the drive status window.
Table 11: Fault Symptom Codes (Continued)
FSC Message ERP