MSL5000 and 6000 Series Tape Libraries User Guide

Troubleshooting
160 HP StorageWorks MSL5000 and MSL6000 Series Tape Libraries User Guide
5014 Drive Already Loaded
(Cleaning operation failed because the
drive already has a cartridge inserted.)
■ Press the Enter button to clear the
message.
■ Invalid user initiated operation. Set
parameters correctly and try again.
■ If the tape in the drive is not in use, unload
the drive and retry the cleaning operation.
5015 Expired Clean'g Cart
(Cleaning operation failed due to an
expired cleaning cartridge.)
■ Press the Enter button to clear the
message.
■ Remove expired cleaning cartridge from
library and discard. Replace with new
cleaning cartridge.
5016 Not a Clean'g Cart
(Cleaning operation failed because the
loaded cartridge is not a cleaning
cartridge.)
■ Press the Enter button to clear the
message.
■ Make sure tape in reserved slot is a
cleaning cartridge.
■ Invalid user initiated operation. Set
parameters correctly and try again.
5035 Drive Timeout Error
(Cleaning operation failed because the
drive timed out.)
■ Press the Enter button to clear the
message.
■ Invalid user initiated operation. Set
parameters correctly and try again.
■ Ensure the drive shows good status
through the drive status window.
503B Move Command Fail
(A front panel move operation failed.)
■ Press the Enter button to clear the
message.
■ Invalid user initiated operation. Set
parameters correctly and try again.
503C Clean Operation Timeout
(Cleaning operation failed because the
drive timed out.)
■ Press the Enter button to clear the
message.
■ Invalid user initiated operation. Set
parameters correctly and try again.
■ Ensure the drive shows good status
through the drive status window.
Table 11: Fault Symptom Codes (Continued)
FSC Message ERP