HP StoreEver Tape Libraries Failover User Guide (5697-3323, June 2014)

ManualsBrandsHP ManualsStorageHP MSL4048 2 LTO-5 Ultrium 3000 SAS Tape Library

1

2

3

4

5

6

7

8

9

Table Of Contents

HP StoreEver Tape Libraries Failover User Guide
Contents
1 Overview
2 Enabling basic path failover
3 Installing advanced path failover
4 Preparing the switches and hosts for failover
- Hardware-specific requirements for basic failover
  - Brocade switches
  - Cisco switches
- Hardware-specific requirements for advanced path failover
5 Configuring failover for the HP StoreEver ESL G3 Tape Libraries
- Configuring data path failover
- Configuring control path failover
6 Configuring failover for HP StoreEver MSL6840 Tape Libraries
- Configuring control path failover
- Configuring data path failover
  - Enabling data path failover
  - Verifying data path failover
7 Configuring failover for other HP StoreEver MSL Tape Libraries
- Configuring data path port failover
  - Enabling data path port failover
  - Verifying data path port failover
- Configuring basic control path failover
8 Installing and using Windows advanced path failover drivers
- Installing the Windows advanced path failover drivers
  - Downloading and installing the drivers
  - Uninstalling drivers
- Windows driver theory of operation
  - Driver components
  - Device firmware
9 Installing and using Linux advanced path failover drivers
10 Installing and using HP-UX advanced path failover drivers
11 Troubleshooting failover operation
12 Advanced troubleshooting techniques
- Windows driver debug dump setup
13 Support and other resources
A Data Protector device discovery with advanced path failover
Index

© Copyright 2014 Hewlett-Packard Development Company, L.P.