HP StorageWorks MSL Library Extender user guide (AQ746-96005, September 2009)
Table Of Contents
- HP StorageWorks MSL Library Extender user guide
- Table of Contents
- 1 Features and overview
- 2 Configuring and operating an extended library
- 3 Installing the Library Extender
- Identifying product components
- Downloading product documentation
- Determining the master and lower Library
- Saving the Library configurations
- Upgrading the Library firmware
- Enabling extended mode
- Removing the cartridges from the Libraries
- Powering off the Libraries
- Positioning the Libraries in a rack
- Relocating tape drives
- Removing and replacing drive bay covers
- Removing the USB device and Ethernet cable from the lower Library
- Extending the pull-out tab
- Aligning the Libraries
- Installing the Extender
- Powering on the extended library
- Verifying the installation
- 4 Using diagnostic tools and troubleshooting
- 5 Servicing the Library Extender
- Replacing the Library Extender
- Removing the Library Extender
- Removing a cartridge from the Extender
- Repackaging the Library Extender
- Releasing the magazines manually
- 6 Support and other resources
- A Technical specifications
- B Electrostatic discharge
- C Regulatory compliance notices
- Glossary
- Index
straps, ground
boot, 73
heel, 73
toe, 73
Subscriber's Choice, HP, 67
supported configurations, 11
symbols in text, 68
T
Taiwanese notices, 78
tape drive numbering, 12
technical support
HP, 67
service locator website, 68
text symbols, 68
toe straps, using, 73
tools, conductive type, 73
troubleshooting, 43
troubleshootings
error codes, 48
U
updating firmware, 25
V
viewing
library identity, 17
library status, 18
W
warning
rack stability, 14
websites
customer self repair, 69
HP ,
HP Subscriber's Choice for Business, 67
product manuals, 68
work mat, static-dissipating, 73
wrist straps
specifications, 73
using, 73
HP StorageWorks MSL Library Extender user guide 95