HP StorageWorks MSL2024, MSL4048, and MSL8096 Tape Libraries firmware release notes (AK378-96019, June 2009)

IMPORTANT:

Several MSL2024 configuration settings are reset to defaults if the Library is upgrading from library

firmware versions 1.70 or 1.80:

• Mailslot is set to disabled.

• Drive 1 SCSI ID is set to 4.

• Drive 2 SCSI ID is set of 5.

• Master Drive (Library LUN hosted by) is set to Drive 1.

• Drive 1 power is set to on.

• Drive 2 power is set to on.

• Library Mode is set to Automatic.

• Autoload Mode is disabled.

• Loop Mode is disabled.

All versions not listed are inactive.

Table 1 MSL2024 firmware versions

StatusReleasedFirmware version

Active — bridge only5/31/20061.91

Active5/18/20094.50

Active6/19/20094.60

Table 2 MSL4048 firmware versions

StatusReleasedFirmware version

Active5/18/20096.80

Active6/19/20096.90

Table 3 MSL8096 firmware versions

StatusReleasedFirmware version

Active5/18/20099.20

Active6/19/20099.30

Effective date

June 23, 2009