HP StorageWorks 2300 Family Modular Smart Array CLI reference guide (500912-002, July 2010)

HP StorageWorks 2000 G2 Modular Smart Array CLI Reference Guide 165
show snapshots
Description Shows information about snapshots for a specified controller, master volume, or snap pool. If no
parameters are specified, information about all snapshots is shown.
Syntax To show snapshots by controller:
show snapshots [controller a|b|both]
To show snapshots by master volume:
show snapshots [master-volume volume]
To show snapshots by snap pool:
show snapshots [snap-pool volume]
Parameters controller a|b|both
Optional. Shows snapshots owned by controller A only, by controller B only, or by either controller
(both).
master-volume volume
Optional. Shows snapshots associated with the specified master volume name or serial number. For
syntax, see Command syntax.
snap-pool volume
Optional. Shows snapshots associated with the specified snap pool name or serial number. For
syntax, see Command syntax.
Output Vdisk
Vdisk name
Serial Number
Snapshot serial number
Name
Snapshot name
Creation Date/Time
Date and time the snapshot was prepared or committed
Status
Indicates whether the snapshot is available or unavailable
Status-Reason
Shows --- for Available status, or a reason for Unavailable status:
• MV Not Accessible: Master volume is not accessible
• MV Not Found: Master volume is not found
• SP Not Accessible: Snap pool is not accessible
• SP Not Found: Snap pool is not found
• SS Pending: Snapshot is pending
• VC-MD In Progress: Volume-copy with modified data is in progress
• RB-MD In Progress: Rollback with modified data is in progress
• Unknown
Master Volume Name
Name of the volume that the snapshot was taken of
Snap-pool Name
Snap pool name
Snap Data
Total amount of preserved and write data associated with the snapshot