HP StorageWorks 2300 Family Modular Smart Array CLI reference guide (500912-002, July 2010)

164
show snap-pools
Description Shows information about snap pools owned by a specified controller or both controllers.
Syntax
show snap-pools [controller a|b|both]
Parameters controller a|b|both
Optional. Shows snap pools owned by controller A only, by controller B only, or by either controller
(both). If this parameter is omitted, all snap pools are shown.
Output Vdisk
Vdisk name
Serial#
Snap pool serial number
Name
Snap pool name
Size
Total size of the snap pool volume
Free
Amount of free space available in this snap pool
MasterVols
Number of master volumes associated with this snap pool
Snapshots
Number of snapshots using this snap pool
Threshold
Snap pool threshold level (Warning, Error, and Critical)
%Usage
Threshold value (percent of snap pool space used) that triggers the threshold's policy
Policy
Recovery policy invoked when threshold value is reached
SizeToExpand
Increment size by which the snap pool is automatically expanded each time the threshold level is
reached. This parameter applies when the AutoExpand policy is active; otherwise its value is N/A.
Example Show information for snap pools owned by controller A:
# show snap-pools controller a
Vdisk Serial Number Name Size Free MasterVols Snapshots
---------------------------------------------------------------------
R5 SN SP1 374.6GB 374.6GB 1 2
Threshold %Usage Policy SizeToExpand
---------------------------------------------------------
Warning 75% Notify Only N/A
Error 90% Auto Expand 5013.5KB
Critical 99% Delete Snapshots N/A
---------------------------------------------------------------------
See also • create snap-pool
• delete snap-pool
• expand snap-pool
• set snap-pool-policy
• set snap-pool-threshold