HP StorageWorks 2300 Family Modular Smart Array CLI reference guide (500912-002, July 2010)

120
Example Show the cache parameters for the system and for volume V1:
# show cache-parameters V1
System Cache Parameters
-----------------------
Operation Mode: Active-Active ULP
Controller A Cache Parameters
-----------------------------
Write Back Status: Enabled
CompactFlash Status: Installed
Cache Flush: Enabled
Controller B Cache Parameters
-----------------------------
Write Back Status: Enabled
CompactFlash Status: Installed
Cache Flush: Enabled
Volume Cache Parameters
-----------------------
Serial Number: 00c0ff0a906b0000dcaa834701000000
Name: V1
Cache Write Policy: write-back
Cache Optimization: standard
Read Ahead Size: Default
See also • set cache-parameters
• show volumes