HP MSA 1040 CLI Reference Guide (762782-001, March 2014)

virtual-disks 485
cache-read-
ahead
string Not used.
cache-read-
ahead-numeric
uint32 Not used.
cache-flush-
period
uint32 Not used.
read-ahead-
enabled
string Not used.
read-ahead-
enabled-numeric
uint32 Not used.
write-back-
enabled
string Not used.
write-back-
enabled-numeric
uint32 Not used.
job-running string Same as current-job.
current-job string Job running on the vdisk, if any.
• (blank): No job is running.
• DRSC: A disk is being scrubbed.
• EXPD: The vdisk is being expanded.
• INIT: The vdisk is initializing.
• RCON: The vdisk is being reconstructed.
• VRFY: The vdisk is being verified.
• VRSC: The vdisk is being scrubbed.
current-job-
numeric
uint32 Numeric equivalents for current-job values.
• 0: (blank)
• 2: INIT
• 3: RCON
• 4: VRFY
• 5: EXPD
• 6: VRSC
• 7: DRSC
current-job-
completion
string • 0%–99%: Percent complete of running job.
• (blank): No job is running (job has completed).
num-array-
partitions
uint32 Number of volumes in the vdisk.
largest-free-
partition-space
string The largest contiguous space in which a volume can be created. The value is
formatted to use the current base, precision, and units.
largest-free-
partition-
space-numeric
uint32 Unformatted largest-free-partition-space value in 512-byte blocks.
num-drives-per-
low-level-array
uint8 • For a RAID-10 or RAID-50 vdisk, the number of disks in each sub-vdisk.
• For other RAID levels, 1.
num-expansion-
partitions
uint8 Not used.
num-partition-
segments
uint8 Number of free segments available for expansion of volumes.
Table 90 virtual-disks properties (continued)
Name Type Description