HP MSA 1040 CLI Reference Guide (762782-001, March 2014)

security-communications-protocols 451
security-communications-protocols
This basetype is used by show protocols.
Table 68 security-communications-protocols properties
Name Type Description
wbi-http string • Disabled: The standard WBI web server is disabled.
• Enabled: The standard WBI web server is enabled. This is the default.
wbi-http-
numeric
uint32 Numeric equivalents for wbi-http values.
• 0: Disabled
• 1: Enabled
wbi-https string • Disabled: The secure WBI web server is disabled.
• Enabled: The secure WBI web server is enabled. This is the default.
wbi-https-
numeric
uint32 Numeric equivalents for wbi-https values.
• 0: Disabled
• 1: Enabled
cli-telnet string • Disabled: The standard CLI is disabled.
• Enabled: The standard CLI is enabled. This is the default.
cli-telnet-
numeric
uint32 Numeric equivalents for cli-telnet values.
• 0: Disabled
• 1: Enabled
cli-ssh string • Disabled: The secure shell CLI is disabled.
• Enabled: The secure shell CLI is enabled. This is the default.
cli-ssh-numeric uint32 Numeric equivalents for cli-ssh values.
• 0: Disabled
• 1: Enabled
smis string • Disabled: The secure SMI-S interface is disabled.
• Enabled: The secure SMI-S interface is enabled. This option allows SMI-S
clients to communicate with each controller’s embedded SMI-S provider via
HTTP port 5989. This is the default.
smis-numeric uint32 Numeric equivalents for smis values.
• 0: Disabled
• 1: Enabled
usmis string • Disabled: The unsecure SMI-S interface is disabled. This is the default.
• Enabled: The unsecure SMI-S interface is enabled. This option allows SMI-S
clients to communicate with each controller’s embedded SMI-S provider via
HTTP port 5988.
usmis-numeric uint32 Numeric equivalents for smis values.
• 0: Disabled
• 1: Enabled
ftp string •
Disabled: The FTP interface is disabled.
• Enabled: The FTP interface is enabled. This is the default.
ftp-numeric uint32 Numeric equivalents for ftp values.
• 0: Disabled
• 1: Enabled
snmp string • Disabled: The SNMP interface is disabled. All SNMP requests to the MIB
are disabled and SNMP traps are disabled.
• Enabled: The SNMP interface is enabled. This is the default.