HP MSA 1040 CLI Reference Guide (762782-001, March 2014)

network-parameters 421
network-parameters
This basetype is used by show network-parameters.
Table 47 network-parameters properties
Name Type Description
durable-id string Controller network port ID in the form mgmtport_ controller-ID .
active-version uint32 The configured network port IP version.
• 4: IPv4
ip-address string Controller network port IP address.
gateway string Controller network port gateway IP address
subnet-mask string Controller network port IP subnet mask
mac-address string Controller network port MAC address.
addressing-mode string • Manual: Obtain network address from manual (static) settings.
• DHCP: Use DHCP to obtain network address. This is the default.
addressing-
mode-numeric
uint32 Numeric equivalents for addressing-mode values.
• 1: Manual
• 2: DHCP
link-speed string Not applicable.
link-speed-
numeric
uint32 Not applicable.
duplex-mode string Not applicable.
duplex-mode-
numeric
uint32 Not applicable.
auto-
negotiation
string Not applicable.
auto-
negotiation-
numeric
uint32 Not applicable.
health string The health of the network connection.
• OK
• Degraded
• N/A
• Unknown
health-numeric uint32 Numeric equivalents for health values.
• 0: OK
• 1: Degraded
• 3: Unknown
• 4: N/A
health-reason string If Health is not OK, the reason for the health state.
health-
recommendation
string If Health is not OK, the recommended actions to take to resolve the health issue.