HP MSA 1040 CLI Reference Guide (762782-001, March 2014)

show vdisks 317
show vdisks
Description Shows information for all or specified vdisks.
Syntax
show vdisks
[
vdisks
]
Parameters
vdisks
Optional. A comma-separated list of the names or serial numbers of the vdisks to show information
about. For vdisk syntax, see "Command syntax" (page 20).
Output Name
Vdisk name
Size
Vdisk size
Free
Vdisk free space
Own
Either the preferred owner during normal operation or the partner controller when the preferred
owner is offline
Pref
Controller that owns the vdisk and its volumes during normal operation
RAID
Vdisk RAID level
Disks
Number of disks in the vdisk
Spr
Number of spares assigned to the vdisk
Chk
For RAID levels except NRAID, RAID 1, and RAID 50, the configured chunk size for the vdisk.
For NRAID and RAID 1, chunk-size has no meaning and is therefore shown as not applicable
(N/A).
For RAID 50, the vdisk chunk size calculated as: configured-chunk-size x (subvdisk-members - 1).
For a vdisk configured to use 32-KB chunk size and 4-disk subvdisks, the value would be 96k
(32KB x 3).