HP MSA 1040 CLI Reference Guide (762782-001, March 2014)

set system 185
set system
Description Sets the system’s name, contact person, location, and description. Each value can include a
maximum of 79 bytes, using printable UTF-8 characters except angle brackets, backslash, or double
quote. A value that contains a space must be enclosed in double quotes.
The name, location, and contact are included in event notifications. All four values are included in
system debug logs for reference by service personnel. When using the WBI, the system name
appears in the browser title bar or tab.
Syntax
set system
[name
value ]
[contact
value ]
[location
value ]
[info
value ]
Parameters name value
Optional. A name to identify the system.
contact
value
Optional. The name of the person who administers the system.
location
value
Optional. The location of the system.
info
value
Optional. A brief description of what the system is used for or how it is configured.
Example Set the system name to Test and the contact to J. Doe:
# set system name Test contact "J. Doe"
Success: Command completed successfully. (2012-01-21 14:42:12)
See also • show system