HP ProLiant Storage Server Release Notes (January 2006)

Storage Server release notes 23
Issue: Improper closure of Remote Desktop
Description Certain operations can leave the utilities running if the browser is closed instead
of exiting from the program via the application menu or logging off the Remote
Desktop session. Some applications may become orphaned in this manner when
the Remote Desktop Session is exited improperly. A maximum of two Remote
Desktop sessions may be used at any given time. Improper exiting from a session
can result in the sessions becoming consumed.
Workaround To close inactive or orphaned Terminal Service sessions, log in to the NAS server
console as administrator and terminate the sessions and processes using
Terminal Services Manager via Start > Programs > Administrative Tools.
Issue: Disabled network cards not visible in the WebUI
Description If a network card is disabled, the network card does not appear in the WebUI.
Workaround Remote Desktop must be used to re-enable the network card before it is visible
again in the WebUI. Rapid Startup becomes unresponsive if a NIC Team is
established and then Rapid Startup is run with the team in place. The network
settings pages become unresponsive, and the wizard page cannot be exited. To
exit Rapid Startup, click some other menu item in the WebUI.
Issue: Renaming host does not change address bar of browser
Description When renaming the host from the WebUI, the server will restart but the address
bar identification is not altered. The WebUI may continue to function but may
result in a message:
The page cannot be displayed.
or a Terminal Services script error.
Workaround Type the new name of the server into the address bar.
Issue: Renaming host forces a restart where the restart page does not refresh
Description When renaming the host or altering the host name in the Rapid Startup Wizard,
the restart page does not refresh to the Welcome page.
Workaround Retype the new host name in the address bar on port 3202.
Issue: Altering the network interface from DHCP to static causes the page to not return
Description If the WebUI is used to alter the IP settings of the port from which you are
managing, the host will be unreachable from the current address. When this
happens, the network interface page buttons become grayed out and the page
does not return, although the settings take affect.
Workaround To access the WebUI again, close and open the browser and navigate to the
newly identified management port.
Issue: Managing NTFS mount points
Description There is currently no facility for managing NTFS mount points in the WebUI.
Workaround To create or manage NTFS mount points, you must use Remote Desktop. To start
Remote Desktop, select Maintenance > Remote Desktop on the navigation menu.